Creality 10W Laser Module Kit, Laser Engraver Module – Creality Store

4.7 (327) · € 889.99 · En Stock

● 【40W Optical Power】Creality Falcon 2 engraving machine adopts FAC spot compression technology, through the spatial combination of 8 powerful 5W laser diodes, the laser power is increased to 40W. It can cut 20mm basswood, 15mm black acrylic and 0.15mm thin metal plate at one time. ● 【Adjustable Light Spot】This feature
● 【40W Optical Power】Creality Falcon 2 engraving machine adopts FAC spot compression technology, through the spatial combination of 8 powerful 5W laser diodes, the laser power is increased to 40W. It can cut 20mm basswood, 15mm black acrylic and 0.15mm thin metal plate at one time.● 【Adjustable Light Spot】This feature allows for adjusting the light spot size, resulting in a more refined workpiece. Large light spots are better for cutting thicker objects efficiently, while small light spots are preferable for engraving and cutting thinner ones.● 【Integrated Air Assist】Creality Falcon 2 is equipped with an air assist kit, the manual and automatically integrated air assist can not only be manually adjusted through the knob, but also can adjust the airflow through the LightBurn software. Blow away the smoke and dust during the engraving process, protect the lens of the laser head, and make the cutting clean and smooth, so as to keep the edge of the work clean.● 【Triple Monitoring System】(1). Airflow monitoring: help the user to adjust the appropriate airflow size according to the engraving and cutting requirements of the work. (2). Flame monitoring: When the machine detects a flame, the status display light on the fuselage will flash red to give an alarm, and immediately stop in an emergency. (3). Lens dirt monitoring: when the lens dirt reaches a certain level, it will trigger an alarm to prevent lens breakage and frequent replacement.● 【Wide Compatibility】Creality Falcon 2 is compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.
● 【40W Optical Power】Creality Falcon 2 engraving machine adopts FAC spot compression technology, through the spatial combination of 8 powerful 5W laser diodes, the laser power is increased to 40W. It can cut 20mm basswood, 15mm black acrylic and 0.15mm thin metal plate at one time. ● 【Adjustable Light Spot】This feature allows for adjusting the light spot size, resulting in a more refined workpiece. Large light spots are better for cutting thicker objects efficiently, while small light spots are preferable for engraving and cutting thinner ones. ● 【Integrated Air Assist】Creality Falcon 2 is equipped with an air assist kit, the manual and automatically integrated air assist can not only be manually adjusted through the knob, but also can adjust the airflow through the LightBurn software. Blow away the smoke and dust during the engraving process, protect the lens of the laser head, and make the cutting clean and smooth, so as to keep the edge of the work clean. ● 【Triple Monitoring System】(1). Airflow monitoring: help the user to adjust the appropriate airflow size according to the engraving and cutting requirements of the work. (2). Flame monitoring: When the machine detects a flame, the status display light on the fuselage will flash red to give an alarm, and immediately stop in an emergency. (3). Lens dirt monitoring: when the lens dirt reaches a certain level, it will trigger an alarm to prevent lens breakage and frequent replacement. ● 【Wide Compatibility】Creality Falcon 2 is compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.